Setting up card
To be able to program the card direct we need to perform two steps.
One is setting up of the IP address of the card and second will be
making the board recognized as stand alone entity.
To set-up the IP address of the card goto the system view within the
Cortex program. Select the HCSxxx and goto the device view tab.
Within the device tab you will be able to setup the IP address,
netmask and gateway.
The next step is to make the card available as a stand alone card
within the system. To add this card you need to go to the network tab
at the top of the cortex program. Then go to add network device and
choose add ACP device.
Fill out the name of the card and also the ip address.
