Appendix 1 Uploading logos using cortex
Introduction
The most common and easy way to upload logo or fonts is to use Cortex,
which contains a GUI view to upload logos and fonts. Cortex is
downloadable on our website free of charge.
NOTE
For uploading logo’s the bottom Ethernet connection must be used!
Uploading files
Configure the IP address of the HCS network interface using Cortex 1.01
or higher. Use DHCP or fixed IP address on your network and also
configure the subnet mask. Note the HCS may be on the same network as
the rack controller. The IP addresses shown here are just examples, replace
these addresses with others if needed. See picture below.
Select the “upload preset” from the drop down list, and press the Upload
button.
Select a PNG file and click the Open button. The logo files must be of the
PNG type, RGB plus alpha channel. Interlaced PNG files with “Adam 7”
coding are not supported. TGA files are not supported.. Animated OXA
files are not supported. Other file formats are not supported and
recognized. This is by design.
