17
LOGO-INSERTER
LogoA1_Act
(HCS120 only)
With this active preset it is possible to select presets of logo A1 for the
processed output (8 preset available). These presets will have an instant
effect on the output. If the menu item is preceded by ‘
#LogoA1-
’, it is
possible to add this setting to a preset. The presets are stored in memory.
It is also possible to change factory presets. Changing these presets has
direct effect on the processed output.
LogoA1_edit
(HCS120 only)
With the edit preset item it is possible to create your own presets for logo
A1 without the applied changes having any instant effect on the processed
output. There are 8 possible offline adjustable presets. You can freely
change the selected edit preset, without the active preset being set to
another setting. It will have no immediate effect on the processed output,
until
LogoA1_act
is changed to the setting you adjusted with
LogoA1_edit
.
#LogoA1-Name
(HCS120 only)
This setting displays the first 16 characters of the filename for the curren
t
LogoA1_edit
logo. This is a read only item.
If no logo is shown, one of the following messages are shown:
No file
: There is no file to be displayed,
Unknown file format
: File format isn’t recognized/suitable
VRAM, Out of Mem
: Video RAM is out of memory. Nevertheless,
files are being stored on the flash disk.
Error: file corruption
: Uploaded file is corrupt and will be
renamed to <filename.extension>.error
#LogoA1-Origin
(HCS120 only)
With this setting you can change the
#LogoA1-XPos
and
#LogoA1-
YPos
settings to default to
Top-Left
,
Top-Right
,
Bottom-Left
,
Bottom-Right
or
Center
positions. Default is
Top-Left
.
#LogoA1-XPos
(HCS120 only)
This setting sets the horizontal position of logo A1. Can be ranging from
-2047px till 2048 pixels. Default is pixel 0.
#LogoA1-YPos
(HCS120 only)
This setting sets the vertical position of logo A1. Can be ranging from
-2047px till 2048 pixels. Default is pixel 0.
#LogoA1-Width
(HCS120 only)
This menu item indicates the width of the image currently in use by logo
A1. This is a read only item.
#LogoA1-Height
(HCS120 only)
This menu item indicates the height of the image currently in use by logo
A1. This is a read only item.
