20
•
Interface Description
Digidata 1322A Operator’s Manual, Copyright 2000-2001, Axon Instruments, Inc.
SCSI Termination
The Digidata 1322A’s SCSI-2 interface comes with active termination on-board for
reliable and high-speed data transfer. The switch on the rear panel provides for
enabling and disabling termination. We recommend that this switch remain in the
ON position. In a SCSI bus, only the devices at both ends of the bus require
termination. If there is more than one SCSI device on the SCSI bus, we
recommend that the Digidata 1322A be placed at the end of the SCSI chain.
Power Supply
The power supply is universal input. Therefore, both 110 and 220 V power sources
are OK to use.
