15
3
Insert the stripped wires into the appropriate slot on the power unit.
•
White – 12
•
Violet – 9
•
Green – 8
•
Gray – 7
4
Tighten down the set screws.
5
Reconnect the male connector to the power unit.
6
Secure the male connector using the small set screws on either end of the
connector.
Note:
When all 7 wires are installed, the power unit should look like this:
Step 4:
Affix the mount
Choose the Appropriate Location.
The mount should be placed approximately 1-1/2” – 2” (3.8–5 cm) from the head liner.
