Assembly
8
Fig 06
Fig 07-08
3) Push the lever coupling face up against the support column
and replace the spring and Hex screw washer. Re-tighten using
the Hex key, NOTE: DO NOT OVERTIGHTEN , see figs 07-08-09.
Fig 05
Lever coupling
Teeth
Teeth
Chuck Compartment
Open the chuck access door by removing the Hex screw and
placing it safely aside. Remove the transport packaging, see fig
10 and wipe the chuck over with a cloth. Close the access door
and replace the Hex screw.
Fig 09
Fig 10
Hex screw
Hex key
Chuck access door
Transport packaging
2) Re-position the lever (B) coupling over the rack and pinion
assembly so that the lever is in the upright position and the
teeth are meshed together, see figs 05-06.
IMPORTANT NOTE: THE HEAD STOCK ASSEMBLY HAS
BEEN LOWERED FOR SHIPPING AND NEEDS TO BE
RAISED TO ITS HIGHEST POSITION. TO DO THIS INSERT
THE LEVER COUPLING OVER THE PINION ASSEMBLY
UNTIL THE TEETH MESH THEN RAISE THE HEAD STOCK.
