Routine Maintenance
25
Daily
• Keep the machine clean.
• Check the saw blade for missing teeth and
cracks, see fig 53.
• Spray oil the bare metal surfaces.
Weekly
• Open the top and bottom wheel covers and clean
out all saw dust.
Monthly
• Open the lower and upper door and check the
condition of the tyres and the drive belt, see figs
53-54.
• Clean impacted ‘crud’ from the tyres, apply a little
oil to the screw threads of the blade and drive belt
tensioners. DO NOT USE OIL near the belt.
• The pivots and the slides of the top wheel
mounting assembly and the captive stub axle of
the belt tensioner in its slot could likewise be lightly
oiled.
• Using an air line
(wearing goggles) blow out the
motor casing.
Fig 53-54
• Check for missing teeth (a)
• Check the condition of the tyres (b)
• Check the condition of the drive belt (c)
a
b
c
Clean out impacted ‘crud’ & saw dust
Clean out impacted ‘crud’ & saw dust
Oil
Summary of Contents for HBS350N
