Quantity
Item
Model Number
1 No.
Mortising Machine Base with Mounting Columns, Plunge Depth Stops,
Balance Spring, Head Box, Chisel Adaptor, Chuck and
Fence Mounting Block assembled
MS3612
1 No.
12mm Auger Chisel and Bit Set
1 No.
Composite Board Machine Table
1 No.
Back Fence with Main Mounting and Hold Down Mounting Rods Fitted
1 No.
Large Tensioning Spring
1 No.
Lift and Shift Locking Handle
1 No.
Fence Adjusting Assembly
1 No
Hold Down Yoke
1 No.
Accessories Rack with 2 Large Panhead Screws
1 No.
Small ‘P’ Clip
1 No.
Rod Lever Handle
1 No.
Small Tensioning Spring
1 No.
Large Head Machine Screw
1 No.
Grip Sleeve
1 No.
1-13mm B6 Drill Chuck
1 No.
B6 to Parallel Chuck Mounting Shaft (For Drilling Operations)
Tool Packet
1 No. 4mm Allen Key
1 No. 5mm Allen Key
1 No. 6mm Allen Key
1 No.
Spring Nose Chuck Key
1 No.
Plastic Tube (Dust Extractor Connector) and Short Bolt
2 No.
Countersunk Screws (Secure Down Machine Table)
1 No.
Small Light Fitting on Flexi-Conduit with Fixing Bracket Attached
1 No.
Lift and Shift Handle
1 No.
Guarantee Card
1 No.
Instruction Manual
What’s in the Box?
03
