This is a great idea, a set of three O’Donnell
jaws, spigotted together and secured with
four screws, giving a range of three sizes,
25mm, 38mm or 50mm, by simply undoing the
screws and sliding the inserts in or out. Our
sincere thanks to the customer who suggested
this idea. Supplied as a complete set of three
jaw sizes with four allen cap head screws and a
hex wrench. The jaws and inserts are now avail-
able separately so you might want to start with the
50mm jaws(211354) and add the inserts at a later date,
but there is a price advantage if you buy them all together.
19
Woodturning Chuck Jaws...
Order no: 718321 O’Donnell Jaw Set
Order no: 211328 25mm O’Donnell Jaw inserts
Order no: 211327 38mm O’Donnell Jaw inserts
Order no: 211354 50mm O’Donnell Jaws
When turning long and thin
projects it’s a great advantage to
be able to grip a blank along a
substantial amount of its length to
impart a good measure of stability
to the workpiece. To overcome this
problem we have designed a pair
of cylindrical jaws, one with a
25mm diameter by 50mm long
bore and the other with a 50mm
diameter by 50mm long bore to
accommodate a range of
workpiece sizes. In addition,
because we are always loath to
provide you with jaws which
perform only one function, we
have added internal and external
vetails on the ends.
310425
310424
CYLINDER
JAWS
Order no: 310424 Cylinder Jaws 25mm
Order no: 310425 Cylinder Jaws 50mm
AXMINSTER
O’DONNELL JAW SET
(Set of Three 25mm, 38mm,50mm)
