Please Save This Manual For Future Reference
- 7 -
Nonperformance of this caution can cause a small sized injury or machine damage.
Basic safety requirements
Never touch the low voltage system on the electric control panels, motors and
terminal boards. Every of mentioned unit is indicated with a shield.
-Before connecting machine to mains: Make sure that all safety parts are in active position and check up their
functioning. Incase of necessary removing doors or protecting coverings unplug the plug from mains socket.
-When door or protecting covering are apart-Do not connect the machine to the mains.
To avoid incorrect operating
-Learn positions of switches before machine starting.
-Avoid touching some switches by chance on running machine.
-Never touch rotating tool by hands or somewhat else.
-When you will not work on at the machine-switch it off by control panel switch and unplug it from the mains socket.
-Before cleaning: Switch off the machine and unplug it from socket.
-Before doing maintenance inside machine: Always switch it off and disconnect plug from mains socket.
-When more workers operate the machine-do not begin another work not having informed other worker about your
intention how you will run on.
-Do not do up the machine in any way able to endanger its safe operating.
-In doubts about correctness of technique –contact a responsible person.
WARNING!
Safety is the most important consideration in the operation of this equipment. The following instructions must be
followed at all times.
-Do not neglect practicing of regular inspections in tune with ser-vice manual
instructions.
-Check up and make sure that nothing troublesome occurs on the machine.
-After finishing of work adjust the machine so as to be ready for following operations.
In case of mains outage - stop the machine immediately, and unplug the plug from socket.
-Do not over-paint, wear, damage, do up nor get off safety shields. If they get unreadable or lost-contact production
plant and renew them.
Working dress and personal safety
-Experience shows that various personally worn objects e.g. finger rings, watches,
wristbands and the like used to cause injuries.
-Hence put them away before beginning of work, fasten sleeves,
remove tie-those could be caught by various parts of working machines. Brace your hair so as not to fly free and wear
suitable shoes recommended or rated by working safety rules of a country in question.
-Wear safety outfit (glasses, apron, safety footwear and the like).
-In case of obstacles above your head in working space- wear a helmet.
-Wear always a protecting mask during sawing material- source of dust (when sawing).
-Never wear free working dress.
-Never work on the machine under influence of drugs or spirit drinks.
-If you suffer from staggers, fade or swoon - do not work on the machine.