Axis Q7404 User Manual Download

Page: 16 / 62

AXIS Q7404 Video Encoder

Media Streams

Note

•

<ip>=

IP addess

• The Axis product supports QuickTime 6.5.1 and later.

• QuickTime adds latency to the video stream.

• It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee

this.

Accessing Audio Streams

The Live View page provides access to audio through AXIS Media Control; in addition audio can be accessed in the following ways:

•

VAPIX® Application Programming Interface (API)

For more information, visit www.axis.com/developer

•

Windows Media Player

supports simplex audio. The following paths can be used:

Unicast via RTP:

axrtpu://<ip>/axis-media/media.amp

Unicast via RTSP:

axrtsp://<ip>/axis-media/media.amp

Unicast via RTSP, tunneled via HTTP:

axrtsphttp://<ip>/axis-media/media.amp

Multicast:

axrtpm://<ip>/axis-media/media.amp

•

QuickTime

supports G.711 and AAC audio encoding. The following paths can be used:

rtsp://<ip>/axis-media/media.amp

rtsp://<ip>/axis-media/media.3gp

•

The

Java applet

supports simplex audio with G.711 encoding.

Summary of Contents for Q7404































































Search results

Summary of Contents for Q7404

Reviews:

Related manuals for Q7404

Brands by name

Popular brands

Axis Q7404, User Manual

Search results

Summary of Contents for Q7404

Reviews:

Related manuals for Q7404

Brands by name

Popular brands