AXIS Q6078-E PTZ Camera
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to
Video > Image > Wide dynamic range
.
2. Turn on WDR.
3. To set the amount of WDR, select Low, Medium or High from the
WDR level
list.
4. If you still have problems, go to
Exposure
and adjust the
Exposure zone
to cover the area of interest.
Find out more about WDR and how to use it at
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
ABC
123
1. Go to
Video > Image
and click
.
2. Click
for
Pixel counter
.
3. In the camera’s live view, adjust the size and position of the rectangle around the area of interest, for example where you
expect license plates to appear.
You can see the number of pixels for each of the rectangle’s sides, and decide if the values are enough for your needs.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
7
