AXIS Q6078-E PTZ Camera
Configure your device
Note
If you set the switch to night mode to occur when it’s brighter, the image remains sharper as there is less low-light noise. If
you set the switch to occur when it’s darker, the image colors are maintained for longer, but there is more image blur due
to low-light noise.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Adjust the trade-off between noise and motion blur. Go to
Video > Image > Exposure
and move the
Blur-noise trade-off
slider toward
Low noise
.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
•
Set the max gain to a lower value.
•
Open the aperture.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Image without WDR.
Image with WDR.
6
