AXIS Q6042-S PTZ Dome Network Camera
Events
-
Recording
– Triggers the rule when the Axis product records to the storage device. The recording status trigger
can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to
record to the storage device. Note that, this trigger can be used only for edge storage recording status.
•
System
-
System Ready
– Trigger the rule when the product has been started and all services are running. This can for
example be used to send a notification when the product restarts.
•
Time
-
Recurrence
– Trigger the rule periodically. See
Set Up Recurrences on page 42
. This can for example be used to
upload an image every 5 minutes.
-
Use Schedule
– Trigger the rule according to the selected schedule. See
Create Schedules on page 42
.
Actions
Available
actions
include:
•
Day/Night Vision Mode
– Set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Output Port
– Activate an I/O port to control an external device.
•
Overlay Text
– Display an overlay text. See
Use Overlay Text in an Action Rule on page 25
.
•
PTZ Control
-
Autotracking
– Start autotracking. See
Autotracking on page 29
.
-
Preset Position
– Go to a preset position.
-
Guard Tour
– Start a guard tour. See
Guard Tour on page 30
.
•
Record Video
– Record video to a selected storage.
•
Send Images
– Send images to a recipient.
•
Send Notification
– Send a notification message to a recipient.
•
Send SNMP Trap
– Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured
under
System Options
>
Network
>
SNMP
.
•
Send Video Clip
– Send a video clip to a recipient.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see
Recipient Types on page 41
.
To add a recipient:
1. Go to
Events > Recipients
and click
Add
.
2. Enter a descriptive name.
3. Select a recipient
Type
.
4. Enter the information needed for the recipient type.
5. Click
Test
to test the connection to the recipient.
6. Click
OK
.
