Axis Q6042-S PTZ User Manual Download Page 5

Page: 5 / 66

AXIS Q6042-S PTZ Dome Network Camera

Hardware Overview

4. When the pressure inside the camera housing reaches 0.5 bar (7 psi) the pressure relief valve will open. Place your hand

over the pressure relief valve to verify that the gas is flowing out.

5. Keep the gas flowing through the camera housing for one minute before removing the chuck from the inlet valve.

6. Lift the pressure relief valve to let the overpressure out of the camera unit.

7. Repeat the filling process a total of 3 times, leaving the the camera pressurized the last time.

8. Put the caps back on the inlet valve and the pressure relief valve.

Connectors and Buttons

For technical specifications, see

page 65

Multi-connector

Terminal connector for connecting the supplied media converter switch, which provides the following signals:

•

DC Power

•

Network (Ethernet 10/100Base-T)

•

Input/Output (I/O)

The supplied multi-connector cable is required in order to maintain the product’s NEMA/IP rating. For more information, see

Multi-Connector Cable on page 59

SD Card Slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.

• Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to

Setup >

System Options > Storage > SD Card

and click

Unmount

This

product

supports

SD/SDHC/SDXC

cards

(not

included).

For

card

recommendations

Control

Button

For

location

the

control

button,

see

Hardware

Overview

page

The

control

button

used

for:

•

Resetting the product to factory default settings. See

page 58

•

Connecting to an AXIS Video Hosting System service. See

page 50

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 50

. To connect, press and hold the button for about 3 seconds.

LED Indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Summary of Contents for Q6042-S PTZ



































































Search results

Summary of Contents for Q6042-S PTZ

Reviews:

Related manuals for Q6042-S PTZ

Brands by name

Popular brands

Axis Q6042-S PTZ, User Manual

Search results

Summary of Contents for Q6042-S PTZ

Reviews:

Related manuals for Q6042-S PTZ

Brands by name

Popular brands