AXIS Q1775 Network Camera
Technical specifications
Technical specifications
You can find the latest version of the technical specifications at
www.axis.com
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to
Setup > System Options > Ports
& Devices > LED
. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to
Setup > System Options > Maintenance
.
Status LED
Indication
Green
Steady green for normal operation.
Amber
Steady during startup. Flashes when restoring settings.
Note
The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to
Setup > System
Options > Ports & Devices > LED
. See the online help for more information.
Network LED
Indication
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Unlit
No network connection.
Note
The Power LED can be configured to be unlit during normal operation. To configure, go to
Setup > System Options > Ports &
Devices > LED
. See the online help for more information.
Power LED
Indication
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.
Status LED behavior and buzzer signal for leveling assistant
For information on using the control button to start leveling of the camera, see
Color
Buzzer
Camera position
Fixed green
Continuous beep
Level
Flashing green
Fast beeps
Almost level
Flashing orange
Medium beeps
Not level
Flashing red
Slow beeps
Far from level
67
