AXIS P4707-PLVE Panoramic Camera
Configure your device
•
For most use cases, select
Automatic
exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select
Flicker-free
.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select
Flicker-reduced
.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select
Hold current
.
Benefit from IR light in low-light conditions by using night mode
Your camera uses visible light to deliver color images during the day. But as the visible light diminishes, color images become less
bright and clear. If you switch to night mode when this happens, the camera uses both visible and near-infrared light to deliver bright
and detailed black-and-white images instead. You can set the camera to switch to night mode automatically.
1. Go to
Video > Image > Day-night mode
, and make sure that the
IR-cut filter
is set to
Auto
.
2. To set at what light level you want the camera to switch to night mode, move the
Threshold
slider toward
Bright
or
Dark
.
3. To use the built-in IR light when the camera is in night mode, turn on
Allow IR illumination
and
Synchronize IR
illumination
.
Note
If you set the switch to night mode to occur when it’s brighter, the image remains sharper as there is less low-light noise. If
you set the switch to occur when it’s darker, the image colors are maintained for longer, but there is more image blur due
to low-light noise.
Optimize IR illumination
Depending on the installation environment and the conditions around the camera, for example external light sources in the scene,
you can sometimes improve the image quality if you manually adjust the intensity of the LEDs. If you have problems with reflections
from the LEDs, you can try to reduce the intensity.
1. Go to
Video > Image > Day-night mode
.
2. Turn on
Allow illumination
.
3. Click
and select
Manual
.
4. Adjust the intensity.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Adjust the trade-off between noise and motion blur. Go to
Video > Image > Exposure
and move the
Blur-noise trade-off
slider toward
Low noise
.
•
Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
7
