AXIS P4707-PLVE Panoramic Camera
The device interface
Lower limit
: Enter a value to adjust the frame rate between minimal fps and the stream default fps based on scene
motion. We recommend you to use lower limit in scenes with very little motion, where the fps could drop to 1 or lower.
Dynamic GOP
(Group of Pictures): Turn on to dynamically adjust the interval between I-frames based on the level of activity
in the scene.
Upper limit
: Enter a maximum GOP length, that is, the maximum number of P-frames between two I-frames.
P-frames
: Enter the desired number of P-frames. The higher the number, the less bandwidth is required. However, if there are
network congestion, there could be a noticeable deterioration in the video quality.
Bitrate control
:
•
Average
: Select to automatically adjust the bitrate over a longer time period and provide the best possible image
quality based on the available storage.
-
Click to calculate the target bitrate based on available storage, retention time, and bitrate limit.
-
Target bitrate
: Enter desired target bitrate.
-
Retention time
: Enter the number of days to keep the recordings.
-
Storage
: Shows the estimated storage that can be used for the stream.
-
Maximum bitrate
: Turn on to set a bitrate limit.
-
Bitrate limit
: Enter a bitrate limit that is higher than the target bitrate.
•
Maximum
: Select to set a maximum instant bitrate of the stream based on your network bandwidth.
-
Maximum
: Enter the maximum bitrate.
•
Variable
: Select to allow the bitrate to vary based on the level of activity in the scene. More activity requires more
bandwidth. We recommend this option for most situations.
Orientation
Rotate
: Rotate the image to match your requirements.
Mirror
: Turn on to mirror the image.
Audio
Include
: Turn on to use audio in the video stream.
Source
: Select what audio source to use.
Stereo
: Turn on to include built-in audio as well as audio from an external microphone.
24
