AXIS P4707-PLVE Panoramic Camera
Configure your device
4. In the list of actions, under
Recordings
, select
Record video while the rule is active
.
5. In the list of storage options, select
SD_DISK
.
6. Select a camera and a stream profile.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 1 minute.
9. Click
Save
.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and
to stop two minutes after.
Turn on audio:
1. Set up the stream profile to include audio, see
Add audio to your recording on page 15
.
Turn on audio detection:
1. Go to
System > Detectors > Audio detection
.
2. Adjust the sound level according to your needs.
Create a rule:
1. Go to
System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Audio
, select
Audio Detection
.
4. In the list of actions, under
Recordings
, select
Record video
.
5. In the list of storage options, select
SD_DISK
.
6. Select the stream profile where audio has been turned on.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 2 minutes.
9. Click
Save
.
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
Turn on shock detection:
1. Go to
System > Detectors > Shock detection
.
2. Turn on shock detection, and set a value for the shock sensitivity.
Create a rule:
3. Go to
System > Events > Rules
and add a rule.
4. Type a name for the rule.
13
