Axis P3364-VE User Manual Download Page 30

Page: 30 / 71

AXIS P3364-VE Network Camera

PTZ (Pan Tilt Zoom)

4. Select an available preset position and click

Apply

5. Specify the

View Time

in seconds or minutes.

6. Specify the

View Order

or select the

Random view order

option.

7. Click

Save

To modify or remove guard tours, go to

PTZ > Guard Tour

, select the guard tour in the

Guard Tour List

and click

Modify/Remove

Note

For products that support Limited Guard Tour, the product has a fixed minimum view time

For more information see the online help

Advanced

Controls

Advanced PTZ settings can be configured under

PTZ > Advanced > Controls

The

Panel Shortcut Command Buttons

list shows the user-defined buttons that can be accessed from the Live View page’s

Ctrl

panel

. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.

Click

Add

to add a new shortcut command button.

The following PTZ controls are enabled by default:

•

Pan control

•

Tilt control

•

Zoom control

To disable specific controls, deselect the options under

Enable/Disable controls

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.

Summary of Contents for P3364-VE








































































Search results

Summary of Contents for P3364-VE

Reviews:

Related manuals for P3364-VE

Brands by name

Popular brands

Axis P3364-VE, User Manual

Search results

Summary of Contents for P3364-VE

Reviews:

Related manuals for P3364-VE

Brands by name

Popular brands