AXIS M1114–E
System Options
To install a self-signed certificate:
1. Go to
Setup > System Options > Security > Certificates
.
2. Click
Create self-signed certificate
and provide the requested information.
To create and install a CA-signed certificate:
1. Create a self-signed certificate as described above.
2. Go to
Setup > System Options > Security > Certificates
.
3. Click
Create certificate signing request
and provide the requested information.
4. Copy the PEM-formatted request and send to the CA of your choice.
5. When the signed certificate is returned, click
Install certificate
and upload the certificate.
Server/Client certificates can be installed as
Certificate from signing request
or as
Certificate and private key
. Select
Certificate
and private key
if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.
The Axis product is shipped with several preinstalled
CA certificates
. If required, additional CA certificates can be installed:
1. Go to
Setup > System Options > Security > Certificates
.
2. Click
Install certificate
and upload the certificate.
Date & Time
The Axis product’s date and time settings are configured under
System Options > Date & Time
.
Current Server Time
displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see
below).
To change the date and time settings, select the preferred
Time mode
under
New Server Time
:
•
Synchronize with computer time
– Sets date and time according to the computer’s clock. With this option, date and
time are set once and will not be updated automatically.
•
Synchronize with NTP Server
– Obtains date and time from an NTP server. With this option, date and time settings are
updated continuously. For information on NTP settings, see
.
If using a host name for the NTP server, a DNS server must be configured. See
.
•
Set manually
– Allows you to manually set date and time.
If using an NTP server, select your
Time zone
from the drop-down list. If required, check
Automatically adjust for daylight saving
time changes
.
The
Date & Time Format Used in Images
is the date and time format displayed as a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online help
for information on how to create custom date and
time formats. To include date and time in the overlay text, go to
Video
and select
Include date
and
Include time
.
Network
Basic TCP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version
must always be enabled.
40