Axis M1045-LW User Manual Download

Page: 54 / 62

AXIS M3006-V Network Camera

System Options

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button and reconnect power. See

Hardware Overview on page 7

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset

to the factory default settings. If no DHCP server is available on the network, the default IP address is

192.168.0.90

5. Using the installation and management software tools, assign an IP address, set the password, and access the video stream.

It is also possible to reset parameters to factory default via the web interface. Go to

Setup > System Options > Maintenance

Summary of Contents for M1045-LW































































Search results

Summary of Contents for M1045-LW

Reviews:

Related manuals for M1045-LW

Brands by name

Popular brands

Axis M1045-LW, User Manual

Search results

Summary of Contents for M1045-LW

Reviews:

Related manuals for M1045-LW

Brands by name

Popular brands