8
USER MANUAL
__________________________________________________________________________________________________________________
7.
Preparing working environment
Location for the scale should be chosen with care in order to limit influence of
the factors that can interrupt working scale. This location has to maintain proper
temperature for working scale and necessary space for its operating. The scale
should stay on stable table.
Rapid air blasts, vibrations, dust, rapid temperature changes or air humidity over
90% are not allowed in scale surrounding. The scale should be far from heat
sources and devices emitting strong electromagnetic or magnetic fields.
8.
Preparing scale to work
1.
Take the scale, pan
support, pan and feeder
out of the package. It is
recommended to keep the
original scale package in
order to transport the
balance safely in future.
2.
Place the scale on a
stable ground not affected
by mechanical vibrations
and airflows.
3.
Insert pan support
2
into
holes
in
scale
housing.
4.
Put pan
1
on pan
support.
5.
Level the scale using
rotating legs
6
so that the
air bubble in water level
5
is in the middle.
If the scale was taken from a lower temperature surrounding to a room
with higher temperature, e.g. in winter, moisture can liquefy on the scale
casing. Do not connect power supply to the scale, because this can cause
damage or improper work of the scale. In this case leave the scale for at
least 4 hours unplugged for acclimatization.
1
2
5
6
