8
USER MANUAL
_____________________________________________________________________________________________________________________
7.
Preparation to work
1.
Take the scale out of the package
removing protective foils.
2.
Remove the pan and remove protection
elements from below the pan.
3.
Place the scale on a stable ground not
affected by mechanical vibrations and
airflows.
4.
Level the scale with the rotating rear legs
so that the air bubble in the water-level at
the back of the scale is in the middle.
5.
Put on the pan.
6.
Plug the feeder connector to the power
socket at the back of the scale and plug the
feeder to the mains. After self-tests and
result stabilisation, the scale displays zero
indication.
Correct Wrong
