AXIS M31 Network Camera Series
Configure your device
7. Set the postbuffer time to 60 seconds.
8. Click
Save
.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Click
and select
Legacy device interface
.
2. Go to
System > Detectors > Camera tampering
.
3. Set a duration for
Trigger after
. The value indicates the time that must pass before an email is sent.
4. Turn on
Trigger on dark images
. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
Add a recipient:
5. Go to
System > Events > Recipients
and click
Add recipient
.
6. Type a name for the recipient.
7. Select
.
8. Type an email address to send the email to.
9. The camera doesn’t have it’s own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
10. To send a test email, click
Test
.
11. Click
Save
.
Create a rule:
12. Go to
System > Events > Rules
and click
Add a rule
.
13. Type a name for the rule.
14. In the list of conditions, select
Tampering
.
15. In the list of actions, select
Send notification to email
.
16. Select a recipient from the list.
17. Type a subject and a message for the email.
18. Click
Save
.
Applications
Applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to
.
To find the user manuals for Axis applications, go to
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
17
