manualshive.com logo in svg

Axis AXIS 1610, User Manual

Share
Download
Axis AXIS 1610 User Manual Download Page 28

Section 3: Installation

 

AXIS 1610 User’s Manual

 

28

 

Installing printers for Printing over NetBIOS/NetBEUI 

Using

AXIS Print Monitor

in Windows 95/98

and Windows ME

Follow the procedures below to install NetBIOS/NetBEUI ports 

from a Windows 95/98 or Windows ME workstation:

1. Install the AXIS Print Monitor on your workstation. The software 

is available on the AXIS Product Resources CD.

2. To start the Add Printer Wizard, select 

Settings | Printers

 from 

the 

Start

 menu and double-click the 

Add Printer

 icon.

3. Click 

Next>

 in the first dialog. 

4. Select 

Local printer

 as the AXIS 1610 emulates a local printer 

port and click 

Next>

5. Choose an appropriate printer driver for your printer.

Note: 

If the desired printer driver appears in the manufacturer 

and models list, highlight your selection, click 

Next>

 and proceed 

to step 8.

6. If the desired printer driver is not available in the list, click the 

Have Disk...

 button. Insert the printer driver CD that was 

provided with your printer, select the CD drive and click 

OK

.

7. Select the printer driver you want to install from the CD and click 

Next>

8. Select the port you want to use from the Available Ports list and 

click 

Next>

. 

Note:

 The port name is, by default, AXIS followed by the last six 

digits of the AXIS 1610 serial number, e.g. (AXIS100086:) 

9. Enter a descriptive name for your printer and click 

Next>

10. Click the checkbox if you want to print a test page and click 

Finish

.

Summary of Contents for AXIS 1610


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands