Axis AXIS 1610 User Manual Download Page 24

Page: 24 / 57

Section 3: Installation

AXIS 1610 User’s Manual

Installing Printers for Printing over TCP/IP

Using

AXIS Print Monitor

in Windows 95/98

and Windows ME

Follow the procedure below to install TCP/IP Ports from a

Windows 95/98/Me workstation:

Local Printer Port

1. Install the AXIS Print Monitor on your workstation. The software

is available on the AXIS Product Resources CD.

2. Select

Settings |Printers

from the

Start

menu and double-click

the

Add Printer

icon to start the Add Printer Wizard.

3. Select

Local Printer

, as the AXIS 1610 emulates a local printer

port and click

Next>

4. Choose an appropriate printer driver for your printer.

Note:

If the desired driver appears in the manufacturer and

models list dialog, highlight your selection and click

Next>

and

proceed to step 7.

5. If the desired printer driver is not available, click the

Have Disk...

button. Insert the printer driver CD that was provided with your
printer, select the CD drive and click

OK.

6. Select the desired printer driver from the CD and click

Next>

7. Select the

TCP/IP

port you wish to use and click

OK.

Note:

The ports will appear in the format <name>_TCP/IP: ,

where <name> is, by default, AXIS followed by the last six digits
of the print server’s serial number (e.g. AXIS560B35_TCP/IP:)

Note:

If you wish to install a remote TCP/IP port (i.e. if the TCP/IP

port does not appear in the list), select the LPT1 port and follow
the

Remote Printer Port

instructions below.

8. Enter a descriptive name for your printer and click

Next>

9. Click the checkbox if you want to print a test page and click

Finish

Summary of Contents for AXIS 1610


























































Search results

Summary of Contents for AXIS 1610

Reviews:

Brands by name

Popular brands

Axis AXIS 1610, User Manual

Search results

Summary of Contents for AXIS 1610

Reviews:

Brands by name

Popular brands