20
Install the ceiling bracket and cables
1. Installing the trim ring on the player using the six screws (TB 3 x 8).
2. Screw the metal mounting plate to the beam or plywood using the four ST.4.2x16 screws.
3. Take out the screws fixing the LED cover from unit.
4. Identify the dome light wires in the vehicle and connect them to the corresponding dome
light wire on the overhead monitor system.
5. Attach the DVD player to the metal mounting plate using the CM 4x13 screws.
6. Re-fix the LED cover to the unit.
7. Plug in any audio/video source cables.
8. Plug in the power harness into the overhead monitor system in the following order:
ground wire, battery wire, ACC wire and door wire.
Note:
Do not forget to connect the red ACC wire to the ignition switch. If you do not connect this
wire, the battery may drain prematurely.