16
ELECTRONIC CONTROLS
ON/OFF button
When power is supplied to the oven the control panel lights up
and the operating display indicates off. Activating the control
panel requires pressing the on/off button.
START/STOP button
This button starts/stops a previously set program or cooking
cycle.
TEMPERATURE
When the oven is on “ON” the temperature display shows the
temperature in the cooking chamber.
To set the desired cooking temperature press INCREASE (2) or DECREASE (4) buttons
(arrows up and down). The temperature display will show the set value. The new value will be
memorised by waiting 5 seconds or by pressing the TIME button to see the temperature value
in the cooking chamber.
Values go from 90F to 500F (30°C to 260°C).
During cooking the CHAMBER display alternately shows set temperature (TEMPERATURE
icon fixed on) with the actual internal chamber temperature (TEMPERATURE icon flashing).
RESISTANCE icon is on red when the heat is on and green when it is off.
TIME BUTTON
The value on the display starts to flash when pressing “TIME” and the value can be changed
by pressing INCREASE or DECREASE buttons. The CLOCK icon turns on.
The programmable times range from 00hours and 01minutes to 15hours and 59minutes.
To go below the minimum value of 00hours and 01minutes go to:
- END: used from programmed cooking to disable unnecessary phases.
- INF: means “infinite time” the oven will continue to work with the set parameters until
START/STOP button is pressed.
The new value is memorized by waiting 5 seconds or by pressing the TIME button.
The time display is by countdown in hours, minutes and seconds during cooking. A value can
be changed to infinite time (INF) and vice versa.
MOISTURE/STEAM BUTTON
During cooking, the STEAM icon goes on when steam is being released into the cooking
chamber and it flashes when on pause.
PROGRAMS/MANUAL BUTTON
While set at ON, cooking can either be selected manually or programmed.
This button also allows the saving of 99 programs developed by us.
PHASES button
There are 3 different programmable cooking phases. You can program the oven to cook with
three different cooking temperatures, times and humidity settings.
MANUAL COOKING
After setting TIME and TEMPERATURE, the cooking cycle begins by pressing START/STOP.
The cooking cycle may be stopped at any time by pressing START/STOP. Remaining cooking
time can be seen on the display.
1
2
3
4
5
6
7
8
9
10
1
Time Button
2 Increase Button
3 Temperature Display
4 Decrease Button
5 Humidifier Button
6 Start/Stop Button
7 ON/OFF Button
8 Time/Steam Display
9 Program Button
10 Phase
