Axis A20 Owner'S Manual Download Page 110

Page: 110 / 216

One of the most popular options is the Bimini top, which provides protection

from the sun for the driver, observer and may also offer shade to others on-board,

depending on the sun’s angle. It also provides storage for ropes. The deluxe version

also offers surfboard storage.

The canvas cover requires thorough drying prior to the boat being stored. See

the

Care and Maintenance

section of this Owner’s Manual for additional informa

tion.

Wet Sounds eight-inch tower speakers with tweeter offer full mid-bass sound

and clean detailed highs. The Axis-designed G-Force enclosure features water-

proof connectors and optional swivel mounts on the Icon 8. The speakers are

up with amps.

Read the

Dashes and Video Screens

section of this Owner’s Manual for addi

tional information about the speaker operation, as well as material supplied by

the manufacturer.

These aerospace-grade, anodized-aluminum swivel racks are corrosion-re-

sistant and ratchet down with a slight tug on the single lever, securing the wake

items. Be sure that boards are securely in place prior to operating the boat, as

they can become projectiles if they are not. Also, remove boards and stow inside

the boat before trailering. Highway speeds can cause damage even if the boards

are secure on the rack.

The ski rack accommodates two slalom skis with easy-access bungee forks

to free up storage areas on board. The ski racks can be mounted on either the

port or starboard side of the tower, or on both.

Secure boards and/or skis on the rack prior to operating the boat. If

they are not secure, the boards and/or skis may come off the rack and

become projectiles that could damage the boat or hurt individuals.

Remove them from the racks and stow in the boat when towed on a

trailer. Even if secured on the racks, highway speed can cause damage to the boards, skis, tower or boat,

or even cause them to become loosened from the racks. Spinner racks should be locked prior to towing.

bimini

top

Axis

Owners

Manual

2019

Page 99

g-force icon 8
tower speakers

or g-force rev 8

speakers w/horn

clamping spinner

board racks

ski rack

Summary of Contents for A20

























































































































































































































Search results

Summary of Contents for A20

Reviews:

Related manuals for A20

Brands by name

Popular brands

Axis A20, Owner'S Manual

Search results

Summary of Contents for A20

Reviews:

Related manuals for A20

Brands by name

Popular brands