Axis A20, Owner'S Manual

Page: 107 / 216

tower, canvas and
accessories
The tower on all Axis models is the Grey Skull. The
Grey Skull can be raised to its full height for extraor-
dinary boating enjoyment, or lowered for towing and
storage, or for bridge clearance while on the water.
Lowering the Tower:
Step 1: Prior to lowering the tower, fold
any board racks inward.
Step 2: Slide the helm seat all
the way forward and
rotate the seat so that
it faces aft.
Step 3: On each interior side of
the tower legs are two
knobs. On the helm
(driver’s side) of the
tower, simply unscrew
both knobs. Place
the knobs in a secure
location (we suggest
using the same loca-
tion repeatedly so the
knobs will be easy to
find), such as the glove
box or a cup holder.
Step 4: After the knobs are
removed, fold the
Axis logo plate inward
until it is in the fully
lowered position. (It
will still be attached to
the tower base.)
Step 5: On the opposite side,
while holding the overhead hoop bar to steady it, un-
screw both knobs and place in a secure location. Make
sure you hold onto the top bar to prevent it from falling
in case the side place comes loose.
Step 6: After the knobs are removed, do not rotate the Axis logo
plate yet. Slightly lift the overhead hoop bar to relieve
pressure on the leg.
Step 7: With your other hand, now fold the Axis logo plate in-
ward until it is in the fully lowered position. (It will still be
attached to the tower base.)
Step 8: Gently lower the tower toward the aft until it reaches its lowest level.
Axis
Owners
Manual
2019
Page 96
Step 1 Step 2
Steps 3 & 5
Steps 4 & 6
Step 8