background image

 

40 

AXIS 242S IV - System options

System options

Security

User access control is enabled by default, when the administrator sets the root password on 

first access. New users are authorized with user names and passwords, or the administrator 

can choose to allow anonymous viewer login to the Live View page, as described below:

Users

 - the 

user list

 displays the authorized users and access levels:

Provides the lowest level of access, which only allows the user access to the Live View page

An Operator can view the Live View page, create and modify event types and adjust certain other 
settings. The Operator does not have access to the Systems Options configuration pages.

An administrator has unrestricted access to the Setup Tools and can determine the registration of 
all other users. 

User settings

 - check the corresponding checkboxes to enable:

Anonymous viewer login - 

allows any viewer direct access to the Live View 

page.

Anonymous PTZ control login - 

allows any viewer access to the Pan Tilt Zoom 

controls on the Live View page (if Pan/Tilt/Zoom is available).

IP address filtering

C

hecking the 

Enable IP address filtering 

box enables the IP address filtering function. Up 

to 256 IP address entries may be specified (a single entry can contain multiple IP 

addresses). Click the 

Add 

button to add new filtered addresses.

When the IP address filter is enabled, addresses added to the list are set as allowed 

or 

denied addresses. All other IP addresses not in this list will then be allowed or denied 

access accordingly, i.e. if the addresses in the list are allowed, then all others are denied 

access, and vice versa. See also the online help for more information.

Note that users from IP addresses that will be allowed must also be registered with the 

appropriate access rights (

User

,

 Operator 

or

 Administrator

). This is done from 

Setup > 

System Options > Security > Users

Referrals

 - to prevent unauthorized sources from including the video stream from the 

AXIS 242S IV into external Web pages, check the 

Referrals

 box and enter the IP address or 

Host name of the computer that hosts the Web pages with the included video stream. 

Multiple IP addresses/host names can be defined and are separated by semicolons(;)

Viewer
Operator

Administrator

Summary of Contents for 242










































































Reviews: