manualshive.com logo in svg

Axis 242, User Manual, Page: 46 / 73

Share
Download
Axis 242 User Manual Download Page 46

 

46 

AXIS 242S IV - System options

Maintenance

•

Restart

 - The unit is restarted without changing any of the settings. Use this method if 

the unit is not behaving as expected.

•

Restore

 - The unit is restarted and most current settings are reset to factory default val-

ues. The settings that are not affected are:

• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the  subnet  mask
• the system time

•

Default

 - The default button should be used with caution. Pressing this will return all of 

the video server's settings to the factory default values (including the IP address). 

•

Upgrade Server

 - See

 Upgrading the firmware

, on page 52.

•

Backup

 - To take a backup of all of the parameters, and any user-defined scripts, click 

this button. If necessary, it is then possible to return to a previous configuration if set-

tings are changed and there is unexpected behavior.

•

Restore

 - click the 

Browse

 button to locate the saved backup file (see above) and then 

click the 

Restore

 button. The settings will be restored to the previous configuration.

Notes: 

•

Backup

 and 

Restore

 can only be used on the same unit running the same firmware. This feature 

is not intended for multi-configurations or for firmware upgrades.

•Loaded IV modules in the AXIS 242S IV will be reset to their default values for both 

Restore

 and 

Default

. The modules themselves are retained in flash memory during these operations.

Summary of Contents for 242










































































Reviews:

No comments