Axis 241Q Blade User Manual Download Page 44

Page: 44 / 66

AXIS 241Q/S/QA/SA - System Options

UPnP™

The Video Server includes support for UPnP

™

in Windows ME and Windows XP. UPnP

™

enabled by default.

Note:

UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel
from the

Start Menu

and select

Add/Remove Programs

. Select

Add/Remove Windows Components

and

open the

Networking Services

section. Click

Details

and then select

UPnP

™ as the service to add.

RTP (Multicast)/MPEG-4

These settings are the IP address, port number, and Time-To-Live value to use for the

media stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers

should be used for multicast streams. For more information, please see the online help.

Ports & Devices

I/O Ports

- the pinout, interface support and the control and monitoring functions

provided by this connector are described in

Unit Connectors

, on page 47.

Maintenance

• Restart -

The unit is restarted without changing any of the settings. Use this method if

the unit is not behaving as expected.

• Restore

- The unit is restarted and most current settings are reset to factory default val-

ues. The settings that will not be reset are as follows:

• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time

•

Default

- The default button should be used with caution. Pressing this will return all of

the Video Server's settings to the factory default values (including the IP address)

Upgrade Server

- See

Upgrading the Firmware

, on page 51.

Backup

- To take a backup of all of the parameters, and any user-defined scripts, click this

button. If necessary, it is then possible to return to a previous configuration if settings are

changed and there is unexpected behavior.

Restore

- click the

Browse

button to locate the saved backup file (see above) and then click

the

Restore

button. The settings will be restored to the previous configuration.

Note:

Backup

and

Restore

can only be used on the same unit running the same firmware. This feature is not

intended for multi-configurations or for firmware upgrades.

Summary of Contents for 241Q Blade



































































Search results

Summary of Contents for 241Q Blade

Reviews:

Related manuals for 241Q Blade

Brands by name

Popular brands

Axis 241Q Blade, User Manual

Search results

Summary of Contents for 241Q Blade

Reviews:

Related manuals for 241Q Blade

Brands by name

Popular brands