manualshive.com logo in svg

Axis 241Q Blade, User Manual

Share
Download
Axis 241Q Blade User Manual Download Page 38

 

38 

AXIS 241Q/S/QA/SA - Pan Tilt Zoom

Installing PTZ Devices

The Video Server supports several PTZ devices. Please see www.axis.com for a complete 

list of supported devices, and to obtain the correct driver. Follow the instructions below to 

install a PTZ device:

1. Using an appropriate cable, connect the device to your selected port (RS-232 or 

RS-485). These ports are available via the D-Sub connector and the I/O terminal 

connector, respectively. See pages 47 and 48 for more information.

2. In the setup tools, go to 

Setup > System Options > Ports & Devices 

and then 

select the port (RS-232 or RS-485) to configure. 

3. Select 

Pan Tilt Zoom

 from the 

Usage

 drop-down list.

4. Click 

Upload 

to install a PTZ driver

.

 

(PTZ drivers are available from the Axis Web site at www.axis.com)

5. Click 

Port Options...

 to modify the port settings. The default values correspond to 

the values specified by the PTZ driver.

6. From 

System Options > Ports & Devices

, select the port configured for PTZ and 

then select the video source to use with the device.

7. If required, click the Advanced Options button to make further settings.

Note: 

Advanced users and application developers can also use the Axis Application Programming Interface and 
HTTP specification for generic control of PTZ devices using CGI commands or a TCP/IP client. Please refer to 
the Axis Website at www.axis.com for further information.

Summary of Contents for 241Q Blade



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands