AXIS Q9216–SLV Network Camera
Additional settings
Note
When you turn on power saving mode, the IR illumination range is reduced.
Make sure that AXIS Video Motion Detection is running:
1. Go to
Settings > Apps
>
AXIS Video Motion Detection
.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Application
, select
AXIS Video Motion Detection (VMD)
.
4. Select
Invert this condition
.
5. In the list of actions, under
Power saving mode
, select
Use power saving mode while the rule is active
.
6. Click
Save
.
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see
.
1. Go to
Settings > System > I/O Ports
and turn on
Supervised I/O
.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
Digital input
and then select a port.
4. In the list of actions, select
Send notification to email
and then select a recipient from the list. Go to
Recipients
to create a new recipient.
To create a new recipient, click
. To copy an existing recipient, click
.
5. Type a subject and a message for the email.
6. Click
Save
.
Send an email automatically if someone spray paints the lens
1. Go to
Settings > System > Detectors
.
2. Turn on
Trigger on dark images
. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for
Trigger after
. The value indicates the time that must pass before an email is sent.
Create a rule:
1. Go to
Settings > System > Events > Rules
and add a rule.
2. Type a name for the rule.
15
