7
F. Powering and Installation
1. Powering the system indoors
Plug one end of the AC to DC adapter into the DC jack on the side of the main unit, then
plug the other end into the 100~240V AC power outlet.
2. Built-in Battery
Plug one end of the AC to DC adapter into the DC jack on the side of the main unit, then
plug the other end into the 100~240V AC power outlet leave Power ON/OFF to OFF.
At
this time, the LED is red, the unit is charging.
When battery is charged full, the LED
will turn off. At this point you may remove the wall plug and stop charging.
Note
: Each full recharge takes approximately 5 hours and one full charge can provide
power to the player for at least 2 hours.
Make sure you charge the battery at least
8 hours prior to connecting it to the player.
G. Loading and Playing a Disc
a.
After connecting power to the unit, power on
“
DVD player
”
with the power switch.
The power indicator will light (green).
b.
Open the disc tray by pressing OPEN switch, and place a disc into the tray with the
label side facing up.
c.
Close the tray by pressing the
“
PRESS
”
place printed on it. The unit will load the disc
and start playing.
d.
Rotate VOLUME to adjust the DVD player
’
s volume.
e.
To stop playing a disc, press STOP.
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
