AXIOMTEK SHB103 Series, User Manual

Page: 93 / 111

SHB103 LAG1156 Full-Size SBC User’s Manual
Configuring SATA for RAID Function
87
(4) Making a SATA Driver Disk
To install the operating system onto a serial ATA hard disk successfully,
you need to install the SATA controller driver during the OS installation.
Without the driver, the hard disk may not be recognized during the
Windows setup process. First of all, please format a blank floppy disk.
Secondly, follow up these steps below to produce a SATA driver disk.
Users can insert the Driver CD and the formatted blank floppy disk in
another system. And then, please copy all of file of the f6flpy32 folder in
the Driver CD to a floppy disk.
Note Please copy all of file of the f6flpy64 folder, if installing 64-bit
Windows Operating System.