AXIOMTEK SHB103 Series, User Manual

Page: 30 / 111

SHB103 LAG1156 Full-Size SBC User’s Manual
Hardware Installation
24
Step2 Removing the socket protective cover:
1. Place thumb against the front edge of the protective cover and
rest index finger on the rear grip to maintain control of the cover.
2. Lift the front edge of the protective cover to disengage from the
socket. Keep control of the cover by holding the rear grip with
index finger.
3. Lift protective cover away from the socket, being careful not to
touch the electrical contacts.
Note: Vertical removal is NOT recommended, as it requires
higher force and can lead to socket contact damage.
Caution: Never Touch Fragile Socket Contacts to Avoid
Damage and DO NOT TOUCH PROCESSOR SENSITIVE
CONTACTS AT ANY TIME DURING INSTALLATION.