AXIOMTEK SHB103 Series, User Manual

Page: 24 / 111

SHB103 LAG1156 Full-Size SBC User’s Manual
Jumpers and Connectors
18
2.4.11 PS/2 Keyboard, Mouse Connectors (CN28, CN29)
The board provides theMouse (CN28)/ Keyboard (CN29)
interface with a 5-pin connector.
Pin Signal
1 Clock
2 DATA
3 No connector
4 GND
5 +5V
2.4.12 Ethernet RJ-45 Connectors (CN14, CN20)
The RJ-45 connectors LAN1 and LAN2 are for Ethernet. To
connect the board to 100-Base-T or 1000-Base-T hub, just
plug one end of the cable into LAN1
and connect the other
end (phone jack) to a 100-Base-T hub or 1000-Base-T hub.
Pin Signal
1 Tx+ (Data transmission positive)
2 Tx- (Data transmission negative)
3
Rx+(Data reception positive)
4 RJ-1(For 1000 base T-Only)
5
RJ-1(For 1000 base T-Only)
6 Rx- (Data reception negative)
7
RJ-1(For 1000 base T-Only)
8 RJ-1(For 1000 base T-Only)
A
Active LED
B Speed LED