AXIOMTEK NA-330 Series, User Manual

Page: 4 / 60

iv
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the
internal components. Use a grounding wrist strap and place all electronic
components in any static-shielded devices. Most electronic components
are sensitive to static electrical charge.
2. Disconnect the power cords from the NA-330 Series before making any
installation. Be sure both the system and the external devices are turned
OFF. Sudden surge of power could ruin sensitive components. Make sure
the
NA-330 Series is properly grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance
is a must, only a trained technician is allowed to do so. Integrated circuits
on computer boards are sensitive to static electricity. To avoid damaging
chips from electrostatic discharge, observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This will help
to discharge any static electricity on your body.

When handling boards and components, wear a wrist-grounding
strap, available from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows
®
is a trademark of Microsoft Corporation.
AMI is trademarks of AMI Technology Ltd.
IBM, PC/AT, PS/2, VGA are trademarks of International Business
Machines Corporation.
Intel
®
ATOM
and Intel
®
are trademarks of Intel Corporation.
Winbond is a trademark of Winbond Electronics Corp.
Other brand names and trademarks are the properties and registered
brands of their respective owners.