NA-330 Series Network Appliance User’s Manual
Hardware Description
5. HDD Activity LED
：
This connection is linked to hard drive activity LED on the
control panel. LED flashes when HDD is being accessed.
The 2-pin connector (Pin 13, 14) connects the hard disk
drive to the front panel HDD LED, Pin 13 assigned as -,
and Pin 14 as +.
2.5.5 Serial Port1 (For Console) Connector (COM1)
The COM1 Port connector is a RJ-type connector.
Pin
Signal
1
Data Set Ready (DSR)
2
Request to Send (RTS)
3
Ground (GND)
4
Transmit Data (TXD)
5
Receive Data (RXD)
6
Data Carrier Detect (DCD)
7
Clear to Send (CTS)
8
Data Terminal Ready (DTR)
28
Summary of Contents for NA-330 Series
