NA-330 Series Network Appliance User’s Manual
Hardware Description
14
2.2 Memory Module (SODIMM)
The main board supports two DDR3 800 SODIMM socket. Maximum
memory capacity is up to 4GB None-ECC unbuffer memory.
The following steps show you how to install the memory modules:
1
Push down each side of the SODIMM socket.
2
Align the memory module with the socket that notches of memory
module must match the socket keys for a correct installation.
3
Install the memory module into the socket and push it firmly down until it
is fully seated. The socket latches are levered upwards and clipped on
to the edges of the SODIMM.
4
Install any remaining SODIMM modules.
Summary of Contents for NA-330 Series
