AXIOMTEK MVS100-323-FL, User Manual

Page: 25 / 62

MVS100-323-FL User’s manual
Hardware Installation 19
Section 2
Hardware Installation
The MVS100 is convenient for your various hardware configurations, including the memory
module and PCI Express card module (mSATA for storage). Section 2 will show you how to
install the hardware.
2.1 Installing the Memory Module
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Step 3 Turn the system over to the left side to locate and unscrew the four screws. Then
remove the cover.
Step 4 Install the SO-DIMM (small outline dual in-line memory module) into the socket and
push it firmly down until it is fully seated. The socket latches are clipped on to the
edges of the memory module.
→
Step 5 After installing the memory modules, close the cover back onto the system and
fasten all screws.