AXIOMTEK IRU152-EVK-DC, User Manual

Page: 36 / 51

Using the Console Program C/C++
36
CHAPTER 8
Using the Console Program of C/C++
8.1 Analog Input Function
The figure on the next page is the running flow of the DemoAI.exe program.
8.1.1 Execution Path
The 32-bit binary file is located at the following path.
IRU_SDK_Network_v1.0.0.3\C_C++\Bin\x86\DemoAI
8.1.2 Running the binary file
W hen the program is executed, foll ow the menu and select the item. For
example, to read the AI data, follow the steps below:
Step 1. Select the "Module Type" and input the "IP address".
Step 2. Select the "Start AI Polling".
Step 3. Select the "Channel".
Step 4. Select the "Input range".
Step 5. Input the "Divisor" to set up the sample rate.
Step 6. Select the "Trigger Mode".
Step 7. Choose to read the raw data or not. If the data are used for
logging to a file, select "No".
Step 8. If "Record data" is set to "No", the first four data will be shown
on the screen; if the "Record data" is set to "Yes", the data will
be saved to a "AI_Volt.txt" file.
Step 9. Press any key to stop the function.
Step 10. W hen the program is exited, the "AI_Volt.txt" file can be
imported to the Excel program and the data can be plotted as
bellow.