IPC910H Series User’s Manual
Introduction
3
1.2.2 I/O
System
z
I/O Interface -- Rear
ATX power on/off switch
One 2-pin connector output for remote power on/off switch
18VDC to 28VDC with phoenix power plug or External 90W
AC Adapter
One PS/2 keyboard/mouse connector
One VGA connector
Two USB 2.0 ports
Two G.E. LAN ports
One DB-9 as COM1 for RS232/422/485
Note
The default setting of COM1 is RS232. The
RS422/485 mode of COM1 can be supported by
adjusting the jumper inside the system.
Three RS-232 COM Ports as COM2, COM3, COM4
z
I/O Interface -- Front
Four USB 2.0 ports
HDD access/power LEDs
z
Expansion Slot
Two PCIe slots (one PCIe x1 & one PCIe x4; or two PCIe x1)
when backplane HAB100 installed
One PCI & one PCIe slots (one PCI & one PCIe x4) when
backplane HAB103 installed
NOTE The safe value of 12V voltage for one expansion card is
between 0.6A ~ 0.8A; the maximum value for two
expansion cards can’t exceed 2A.
1.2.3 System
Specification
z
Drive Capacity
Supports one 2.5” HDD driver bay; one onboard
