IPC910H Series User’s Manual
Phoenix-Award BIOS Utility
35
z
Boot Other Device
This item allows users to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is “
Enabled”
.
z
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or
80 tracks. The 360Kb type is 40 tracks while 720Kb, 1.2MB and
1.44MB are all 80 tracks. The default value is “
Enabled
”.
Enabled
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS can not
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by
track number. There will be no warning message
displayed if the installed drive is 360K.
z
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is
“On”
.
z
Security Option
This item allows you to limit access to the system and Setup, or just
to Setup. The default value is
“Setup”
.
System
If a wrong password is entered at the prompt, the system
will not boot, the access to Setup will be denied, either.
Setup
If a wrong password is entered at the prompt, the system
will boot, but the access to Setup will be denied.
NOTE
To disable the security, select PASSWORD
SETTING at Main Menu and then you will be
asked to enter a password. Do not type anything,
just press <Enter> and it will disable the security.
Once the security is disabled, the system will
boot and you can enter Setup freely.
