AXIOMTEK IMB207 Series, User Manual

Page: 9 / 81

IMB207 LGA1155 ATX Motherboard
2
Introduction
1.2 Specifications
 CPU

Intel
®
Core
TM
i7 / Core
TM
i5 / Core
TM
i3 / Celeron ® processors.

Supports Intel
®
Turbo Boost Technology (see
Note 1
below).
 System Chipset

Intel
®
Q77 chipset.
 CPU Socket

LGA1155 socket.
 BIOS

AMI BIOS via 64Mb SPI Flash with socket.
 System Memory

Four 240-pin DDR3 DIMM sockets.

Maximum up to 32GB DDR3 memory.

Supports 1066/1333/1600MHz non-ECC memory.
 L3 Cache

Varies with CPU.
 Onboard Multi I/O

Controller: Novation NCT6627UD.

Four serial ports: Double-deck D-Sub with DVI-I connector on the rear I/O for COM1
and 2x5 pin 2.0 pitch box header for COM2/3/4. COM1 supports RS-232/422/485
and other ports support RS-232 only. All ports are powered with +5V/+12V.
 USB Interface

Twelve USB ports (four USB 3.0 ports on the rear I/O, eight USB 2.0 ports on 2x5 pin
2.54 pitch box header).
 Onboard Graphics

Intel
®
integrated Graphics Processing Unit (GPU) processor which goes with Intel
®
Q77 chipset with DisplayPort and DVI-I output (see
Note 2
below).

Memory size – Intel
®
DVMT 5.0 supported.

Resolution – DVI-I output supports up to 1920x1200 pixels with 32-bit color at 60Hz
and DisplayPort output supports up to 2560x1600 at 60Hz.

Output Interface – DVI-I from DAC output via 30-pin DVI-I connector and DisplayPort
from DAC output via DisplayPort connector on the rear I/O.
 Ethernet

LAN1 – Intel
®
82579LM PHY supports 10/100/1000 Base-T Gigabit Ethernet, RJ-45
connector on the rear I/O with 5-pin 2.0 pitch wafer for LED. Also with iAMT 8.0
supported.

LAN2 – Intel
®
82583V NIC, supports 10/100/1000 Base-T Gigabit Ethernet, RJ-45
connector on the rear I/O with 5-pin 2.0 pitch wafer for LED.
 Serial ATA

Three Serial ATA 2.0 ports (3Gb/s performance) and two Serial ATA 3.0 ports (6Gb/s
performance) with SATA RAID 0/1/5/10 by Intel
®
Q77.