AXIOMTEK IMB207 Series User Manual Download

Page: 76 / 81

IMB207 LGA1155 ATX Motherboard

Intel

iAMT Settings

Appendix D

Intel

iAMT Settings

The Intel

Active Management Technology (Intel

iAMT) has decreased a major barrier to IT

efficiency that uses built-in platform capabilities and popular third-party management and
security applications to allow IT a better discovering, healing, and protection their networked
computing assets.

In order to utilize Intel

iAMT you must enter the ME BIOS (<Ctrl + P> during system startup),

change the ME BIOS password, and then select “Intel

iAMT” as the manageability feature.

Entering MEBx

You must go to BIOS to enable Intel

iAMT function.

Exit from BIOS after starting Intel

iAMT, and press <Ctrl + P> to enter MEBx Setting.

Note: It is better to press <Ctrl + P> before the screen popping out.

Summary of Contents for IMB207 Series


















































































Search results

Summary of Contents for IMB207 Series

Reviews:

Related manuals for IMB207 Series

Brands by name

Popular brands

AXIOMTEK IMB207 Series, User Manual

Search results

Summary of Contents for IMB207 Series

Reviews:

Related manuals for IMB207 Series

Brands by name

Popular brands