AXIOMTEK EP812, User Manual

Page: 41 / 73

EP812 Pentium
®
M All-in-One Capa Board User’s Manual
Award BIOS Utility
33
z
Primary Master/Primary Slave/Secondary
Master/Secondary Slave
The categories identify the types of one channel that have been
installed in the computer. There are 45 predefined types and 2
users definable types are for Enhanced IDE BIOS. Type 1 to Type
45 is predefined. Type User is user-definable.
Press <PgUp>/<+> or <PgDn>/<
−
> to select a numbered hard
disk type or type the number and press <Enter>. Note that the
specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter improper information
within this category. If your hard disk drive type does not match
or is not listed, you can use Type User to define your own drive
type manually.
If you select Type User, related information is asked to be
entered to the following items. Enter the information directly from
the keyboard and press <Enter>. This information should be
provided in the documentation from your hard disk vendor or the
system manufacturer.
If the controller of HDD interface is ESDI, select
“
Type 1
”
.
If the controller of HDD interface is SCSI, select
“
None
”
.
If the controller of HDD interface is CD-ROM, select
“
None
”
.
CYLS.
number of cylinders
LANDZONE
landing zone
HEADS number of heads SECTORS number of sectors
PRECOMP write precom MODE HDD access mode
If there is no hard disk drive installed, select NONE and press
<Enter>.
z
Drive A type/Drive B type
The category identifies the types of floppy disk drive A or drive B
installed in the computer.
None No floppy drive installed
360K, 3.5 in 3.5 inch PC-type standard drive; 360Kb capacity
1.2M, 3.5 in 3.5 inch AT-type high-density drive; 1.2MB capacity
720K, 3.5 in 3.5 inch double-sided drive; 720Kb capacity
1.44M, 3.5 in 3.5 inch double-sided drive; 1.44MB capacity
2.88M, 3.5 in
3.5 inch double-sided drive; 2.88MB capacity